Leveraging the multitrack recording capabilities of a digital audio mixer. Connecting a computer to the mixing console. With your smartphone or tablet and an app. I don't know how the pre-amps are on the Tascam, as I use the pre-amps on my Zed10. There are several ways you can use to record live music from an audio mixer, but the four best, proven methods are: Using a portable audio recorder. That’s the most direct signal path from the recorded track to the monitors when using a master fader (Ex. So far I like the setup, it's a very quick and focused way of working. The default output selection on a track’s mixer channel routes the audio to the master fader, via output 1-2, and from there it goes back into the audio interface, where it is converted to analog and sent to the powered speaker system. Here I'll listen to the tascam on the monitors, adjust any track levels and mastering settings. The audio interface performs analog-to-digital conversion and passes the. When all the tracks are recorded, I feed the main output of the tascam to my mixer stereo channel 2 for monitoring. The audio interface could be an external device or an internal sound card from GSEAV. I do all my monitoring from my main mixer, either using the headphone output or monitors. The audio flows through the different sections of the Channel strip. I just check the levels and make sure none of the inputs are overloading. Answer (1 of 2): A typical audio mixer has a tape out output, which, on an analog mixer, is usually a pair of RCA jacks. Signal flow is the route your audio signal takes through the Pro Tools mixer. A is panned hard left, B is panned hard right. ![]() This menu selects the digital input type (ADAT or S/PDIF) to be used by the TOSLINK optical connector and Console’s digital input channels. From the Digital Input menu, choose the digital input format. That's what I do, I have the RCA tape outs going to a converter cable RCA (R&L) to 1/4 TS (R&L) into the DP-008ex Input A & B. At the left of the LUNA window, click the UA icon, then click Settings. For example, a track can have a mono input, a mono to stereo. ![]() ![]() It usually employs level controls such as potentiometers to determine how much of each input is going to each output, and it can incorporate simple on/off assignment buttons. I can't tell from the photos I've been able to locate if the Xenyx has a button that has to be engaged to excite the outs on the mixer, but if you're using headphones, you'll have to engage 'record' and then pause before you can monitor anything from the tape headphone jack. An important aspect is that the signal flow is multi-channel and not fixed throughout the track. A matrix mixer is an audio electronics device that routes multiple input audio signals to multiple outputs. Okay, if you have two RCA to 1/4" TS cables, you should be able to go from the RCA tape outs on the mixer into the two 1/4" inputs on the Tascam.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |